Acu-rite Micro-Line T Bedienungsanleitung PDF herunterladen (Seite 20)

MICRO-LINE Reference Manual

OPERATION

Example: Incremental Dimensions

Let’s say that your print looks like this:

1. Move the tool until the readout display

shows that the X-axis = 1.0000” and

the Z-axis = 2.0000” in the absolute mode.

2. Press the ABS/INCR key to switch to the

incremental mode.

3. Press the X-axis ZERO and the Z-axis

ZERO keys.

4. Begin cutting until the X-axis reads -0.1200”.

Using Incremental Zero

In order to cut a groove to a depth

of 0.120” from the 1” radius, it is

necessary to establish a zero at 1”.

This can be done using the incre-

mental mode without changing the

Datum. Follow these steps:

Using Incremental Presets

In addition to setting incremental zero at the current

tool position, you can also preset the incremental

zero from the current tool position. Enter the dis-

tance and direction you wish to move in relation to

your current position. Follow these steps:

1. Move the tool until the readout display shows that the

X-axis = 1.000” and the Z-axis = 2.0000” in the absolute mode.

2. Press the ABS/INCR to switch to the incremental mode.

3. Press the X key and press the following key sequence:

- . 1 2 ENTER then press the Z-axis ZERO key.

4. The X-axis display will show 0.1200”.

5. Begin cutting until the X-axis reads 0.0000”.

MLTmanual.QXD 2/12/02 4:10 PM Page 38

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 45 46

Keine Kommentare

Acu-rite Micro-Line T Bedienungsanleitung Seite 20